Shop

Ventilation Shaft Grilles and cover

Ventilation Shaft Grilles Cover

*Special colours available upon request.

Ventilation Shaft Grilles Cover, Ø76mm

Used either on its own to ventilate a locker or in conjunction with the stiffening adaptor for connection to a hose.

No screws required: neat aesthetics and time-saving assembly.

Ventilation Shaft Grilles with Gasket

—White

—Gasket: Ø65-70mm

Code: 12410

Polypropylene construction:

Shock and load resistant, impervious to fuel and acetic acid. Notches and lugs hold the hose in position; in addition, the hose must be secured with stainless steel clamps. Connector is easy to fit, by means of 4 screws outside.

When installating the blower, we recommend to place the exhaust louvred ventilator in a reasonably protected area (for example, in the cockpit rather than on the transom), so as to prevent water intrusion into the ventilation circuit. An extra precaution consists in building an elbow in the hose.

Ventilator Connector Ø 76mm

Suitable for Ø 76,2 and 70 mm ducting hose. Manufactured from polypropylene for a good UV-resistance. It is extremely shock and load resistant, compatible with common sealants and impervious to acetic acids. Made to support a hose along a bulkhead. On the straight model, ventilation is ensured by a louvred opening, which also prevents heavy water intrusions.